Wood block decomposition assessment at the Gingin Banksia Woodland site is part of a global program looking at the influence of microbes and invertebrates on wood decay. A common protocol was developed exposing small (~400 cm3) pieces of a wood-substrate (untreated Pinus radiata) to the environment excluding and not-excluding macroinvertebrates (e.g. termites) by the use of a plastic mesh.

<p>This dataset contains audio files from Gingin Banksia Woodland SuperSite. The site was established in 2011 and is located in a natural woodland of high species diversity with an overstorey dominated by Banksia species. For additional site information, see <a href="https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/">Gingin Banksia Woodland SuperSite</a></p> <p>In 2020 four acoustic recorders were set up to collect audio data continuously as part of the Australian Acoustic Observatory (A2O) project. Two recorders were placed in relatively wet habitats and two in relatively dry habitats.</p>

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>.<br /> <br /> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by Banksia spp. mainly B. menziesii, B. attenuata, and B. grandis with a height of around 7m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10%, and in summer these generally hold less than 2% moisture. The water tabl is at about 8.5 m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14m tall, with the eddy covariance instruments mounted at 14.8m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500 m esat and west of the tower. <br/> For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/. <br /><br />

This data contains a list of all vascular plants surveyed in the Gingin Banksia Woodlands site in 2018.

<p>Digital Hemispherical Photography (DHP) upward-looking images are collected three times per year to capture vegetation and crown cover at the Gingin Banksia Woodland SuperSite. These images are used to estimate Leaf area index (LAI). </p> <p> The Gingin Banksia Woodland SuperSite was established in 2011 and is located in a natural woodland of high species diversity with an overstorey dominated by Banksia species. For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/. </p><p> Other images collected at the site include digital cover photography (DCP), photopoints, phenocam time-lapse images taken from fixed under and overstorey cameras and ancillary images of fauna and flora. </p>

<p>Fixed cameras installed at the Gingin Banksia Woodland SuperSite provide a time series of fine scale data as a long-term record of vegetation structure and condition. This dense time series of phenocam images provides data for analysis of ecological responses to climate variability, and when consolidated across the entire terrestrial ecosystem research network, supports calibration and validation of satellite-derived remote sensing data, ensuring delivery of higher quality results for broader scale environmental monitoring products.</p> <p>Images are captured hourly during daylight hours. Images and data products, including timeseries of the Green Chromatic Coordinate (Gcc) for a region-of-interest (ROI) that delineates an area of specific vegetation type, are made available on an almost real-time basis.</p> <p>The Gingin Banksia Woodland SuperSite was established in 2011 and is located in a natural woodland of high species diversity with an overstorey dominated by Banksia species. For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/.</p> <p>Other images collected at the site include photopoints, hemispherical upward photographs, and ancillary images of fauna and flora. </p>

High quality digital site reference images are captured for the core 1 hectare vegetation plot of the site on an annual basis to provide context for researchers to understand the general layout and vegetation of the study site, and as a visual reference to monitor any changes over time. Photopoints will be taken annually using the five point photopoint method. The set of images for each year usually consists of twenty images: four images taken at each corner of the plot facing each of the four cardinal points, and four images taken from the centre of the plot facing each corner. <br /> The Gingin Banksia Woodland SuperSite was established in 2011 and is located in a natural woodland of high species diversity with an overstorey dominated by Banksia species. For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/. <br /> Other images collected at the site include digital cover photography, phenocam time-lapse images taken from fixed under and overstorey cameras and ancillary images of fauna and flora.

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in Banksia woodland on the Swan Coastal Plain 70km north of Perth, Western Australia using eddy covariance techniques. <br /> <br /> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by Banksia spp. mainly B. menziesii, B. attenuata, and B. grandis with a height of around 7m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10%, and in summer these generally hold less than 2% moisture. The water tabl is at about 8.5 m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14m tall, with the eddy covariance instruments mounted at 14.8m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500 m esat and west of the tower. <br/> For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/. <br />This data is also available at http://data.ozflux.org.au .<br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>.<br /> <br /> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by Banksia spp. mainly B. menziesii, B. attenuata, and B. grandis with a height of around 7m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10%, and in summer these generally hold less than 2% moisture. The water tabl is at about 8.5 m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14m tall, with the eddy covariance instruments mounted at 14.8m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500 m esat and west of the tower. <br/> For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/. <br /><br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by <em>Banksia</em> spp. mainly <em>Banksia menziesii</em>, <em>Banksia attenuata</em>, and <em>Banksia grandis</em> with a height of around 7&nbsp;m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10&nbsp;m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10&nbsp;%; and in summer these generally hold less than 2&nbsp;% moisture. The water table is at about 8.5&nbsp;m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14.8&nbsp;m tall, with the eddy covariance instruments mounted at 14.8&nbsp;m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500&nbsp;m east and west of the tower. <br/> <br/>